The centrifugal drum is included in the basic equipment of the PROFIT.
A belt is used as abrasive, which only has to be pushed onto the sanding drum. This allows a quick exchange of the abrasive. When the machine is switched on, the centrifugal force causes the lamellas of the sanding drum to rise and thus tension the sanding belt.
The following version is available:
Drum Width 200 mm
This sanding drum is still available as a spare part for the PROFIT.
The abrasive must be cut to size using a template, included in the machine accessories, and then tensioned in the sanding roller with two clamping bolts.
The following version is available:
Drum width 200 mm
Due to its untreated surface, the wooden handles provide a pleasant feeling while working. The original plastic handles can be quickly and easily replaced with beech wood handles.
The PRCD-S serves as residual current protection device. Its use on construction sites is prescribed by the German Trade Association. It is the only mobile protective device that meets the requirements of the German Trade Association.
The PRCD-S
• detects all possible electrical faults,
• cannot be switched on in case of error,
• checks the intact protective conductor functions before switching on and during operation of the machine
• prevents the machine from restarting automatically, e.g. after the elimination of a power failure.
Our cables are reliable, safe and protect the user!
They are approved for construction sites by German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures. The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).
The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!
Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.
A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.
LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders
Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)
The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor
It can be quickly hooked onto the top of the guide tube and always keeps the extension cable, which is attached to it with a rubber ring, safely out of the machine's working area. The cable support can be turned to the right and left.
The MultiClip additionally seals the dust bag during sanding and protects the environment from dust leakage. It is very easy to handle.
The tool bag contains all the necessary tools to carry out simple maintenance work and settings on the machine by yourself. It is included in delivery of the machine.