The ergonomic paddle lever together with an adjustable quick lift plate and a larger ball-head ensure a completely new sanding experience. This system now also allows secure fixing and significantly faster separation of the upper and lower parts of the rod.
For machines built after 1990, it is possible to retrofit either the entire system or only the paddle lever.
Available for HUMMEL®, ELF and SUPERHUMMEL.
This sanding drum is included in the basic equipment of the machine.
The convex design of its rubber coating ensures both a particularly high abrasion rate and a smooth transition in the overlap area of the sanding paths. Therefore the sanding drum is of central importance for a good and economical sanding result.
All drums are carefully processed, profiled and then precisely balanced in our factory. The resulting low-vibration concentricity ensures evenly removal and thus the highest sanding quality.
For both the HUMMEL® and the SUPERHUMMEL, a red sanding drum with a hard rubber coating is available as an accessory.
The levelling of softwood floors (e.g. from spruce, pine and fir) with many knots can be a challenge. Due to the hard rubber coating of this sanding drum such wooden floors can also be processed effectively.
The convex shape of its rubber coating ensures both a particularly high abrasion rate during sanding and a smooth transition of the sanding paths. The sanding drum is therefore of central importance for a good and economical sanding result.
All drums are carefully processed, profiled and then precisely balanced in our factory. The resulting low-vibration concentricity ensures even abrasion and thus the highest sanding quality.
Areas such as upper body muscles, spine and intervertebral discs are normally particularly stressed during sanding. By using the safety belt that is attached to the machine, these areas are noticeably relieved during work.
The belt has an integrated back padding. The waist size can be adjusted flexibly. If necessary, the belt can be quickly separated from the machine by a safety device.
The use of the safety belt therefore allows a much more relaxed working with the HUMMEL®, SUPERHUMMEL and ELF. The physical effort is thus considerably reduced!
The Transcart is used to transport the HUMMEL®, SUPERHUMMEL and ELF. It protects the wheels and the sanding drum, especially on unpaved roads.
The practical Transcart can be quickly and easily attached to the sanding machine and is immediately ready for use.
Due to its untreated surface, the wooden handles provide a pleasant feeling while working. The original plastic handles can be quickly and easily replaced with beech wood handles.
The PRCD-S serves as residual current protection device. Its use on construction sites is prescribed by the German Trade Association. It is the only mobile protective device that meets the requirements of the German Trade Association.
The PRCD-S
• detects all possible electrical faults,
• cannot be switched on in case of error,
• checks the intact protective conductor functions before switching on and during operation of the machine
• prevents the machine from restarting automatically, e.g. after the elimination of a power failure.
Our cables are reliable, safe and protect the user!
They are approved for construction sites by German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures.
The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).
The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!
Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.
A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.
LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders
Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)
The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor
It can be quickly hooked onto the top of the guide tube and always keeps the extension cable, which is attached to it with a rubber ring, safely out of the machine's working area. The cable support can be turned to the right and left.
The MultiClip additionally seals the dust bag during sanding and protects the environment from dust leakage. It is very easy to handle.
The tool bag contains all the necessary tools to carry out simple maintenance work and settings on the machine by yourself. It is included in delivery of the machine.