This attachment is suitable for working on the edges. Equipped with it, the ELAN can also be used for sanding wooden stairs due to its small, compact design and the resulting manoeuvrability.
Sanding discs can be used both for velcro and for thightening.
Various attachments are available for the ELAN, which can be quickly and easily exchanged.
Product Details:
Plate diameter: 150 mm
Attachment length: 110 mm
Due to its length this attachment is particularly suitable for sanding under obstacles (radiators, shelves etc.). Sanding discs can be used both for velcro and for thightening.
Various attachments are available for the ELAN, which can be quickly and easily exchanged.
Product Details:
Plate diameter: 150 mm
Attachment length: 310 mm
Finishing the corners of wooden floors is usually very time-consuming. By using the corner attachment for ELAN, for which only sanding discs for tightening are available, the time required for this is reduced.
Various attachments are available for the ELAN, which can be quickly and easily exchanged.
Product Details:
Plate diameter: 75 mm
Attachment length: 110 mm
Brings light into the darkness!
This accessory for the FLIP® and ELAN illuminates the working area. The surface quality of the wooden floor can be checked while sanding.
The focusable LED lamp is removable and can also be used as a torch independently of the machine.
It is possible to equip the machine with one working lamp.
The PRCD-S serves as residual current protection device. Its use on construction sites is prescribed by the German Trade Association. It is the only mobile protective device that meets the requirements of the German Trade Association.
The PRCD-S
• detects all possible electrical faults,
• cannot be switched on in case of error,
• checks the intact protective conductor functions before switching on and during operation of the machine
• prevents the machine from restarting automatically, e.g. after the elimination of a power failure.
Our cables are reliable, safe and protect the user!
They are approved for construction sites by German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures. The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).
The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!
Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.
A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.
LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders
Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)
The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor
The MultiClip additionally seals the dust bag during sanding and protects the environment from dust leakage. It is very easy to handle.