Our new disc brushes are the perfect addition to our TRIO brushing discs. They make it possible to give wooden floors a brushed look even directly on the edge with only one work step.
The disc brush can be quickly and easily mounted on an angle grinder or, with an adapter, on a cordless screwdriver or drill - and you‘re ready to go!
Technical data:
• Disc diameter: 100 mm
• Base body material: Polypropylene
• Bristles material: Abrasive nylon fibers / corrugated stainless steel wire
• Bristles material diameter: 1,6 mm / 0,2 mm
• Bristles height: 40 mm / 20 mm
• Bristles rows: 3
Adapter for Disc brush: Compatible with cordless screwdrivers or drills. Also usable with other power tools with a M14 screw thread.
It is ideal for the simple and gentle assembly of parquet or plank elements.
Due to the special shape of the impact tool, it always lies flat on the elements when placed on the side with groove or tongue. The striking force of the hammer is always distributed over the entire width of the impact tool. This guarantees a very direct, efficient and edge-protecting power transmission.
The impact tool can be applied with both the long and the narrow side and can therefore be used independently of the width of the wooden element.
This tool developed by LÄGLER® is made of very impact-resistant plastic and is therefore particularly durable.
The parquet layer tool simplifies the laying of parquet and plank elements.
The last elements towards the wall can only be laid with this tool. The felt strip on the parquet layer tool reliably protects the elements to be laid and, if necessary, also the wall.
The parquet layer tool is available in a wide and a narrow version.
Ear muffs with integrated stereo radio.
• Digital FM/MW tuning with LCD display
• 10 preset stations
• MP3 players can be connected
• High wearing comfort
• Noise Reduction Rating: 29 Decibel
Earmuffs with foldable headband and waist bag.
• High wearing comfort
• Noise reduction rating: 20 Decibel
The PRCD-S serves as residual current protection device. Its use on construction sites is prescribed by the German Trade Association. It is the only mobile protective device that meets the requirements of the German Trade Association.
The PRCD-S
• detects all possible electrical faults,
• cannot be switched on in case of error,
• checks the intact protective conductor functions before switching on and during operation of the machine
• prevents the machine from restarting automatically, e.g. after the elimination of a power failure.
The single-phase transformer compensates undervoltages, as can occur, for example, in buildings with outdated electrical installations or due to extremely long supply lines. This enables the machines to operate even under these conditions.
Adjustable in five steps from 180 V to 220 V.
Plastic housing with two carrying handles, voltmeter and output socket.
According to European Standard EN 61558-2-13; 3,17 kVA.
Dimensions:
Length 35 cm
Width 20 cm
Height 21 cm
Weight: 16 kg
Our cables are reliable, safe and protect the user!
They are approved for construction sites by German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures. The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).
The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!
Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.
A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.
LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders
Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)
The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor